Still stylish this year is the draped front cardigan, which is so easy to sew, even if you don’t have a pattern. One of my sewing friends asked me how to alter a cardigan pattern to make a draped front, so I thought I’d share the information with you too – with apologies for the poor photos.
Literally smiling at the camera, I was wearing a very lightweight wool knit sweater I sewed. (because of the fabric weight, it doesn’t drape as well as heavier fabrics). Because of the striped design, it is easy to see how the sweater pattern was altered.
This was Jalie’s pleated sweater pattern 2919 with the pleats removed and without a collar. In the next photo, you will see that 14-16″ of fabric was added to each side of the center front in order to achieve the draped look. The neckline was curved slightly as well.
In the following photo you can see that when widening the front, I kept the edge on the grain of the fabric. To finish the neckline, I cut a 2-1/2 or 3″ band of fabric (cut on the grain, using the lace pattern in the fabric) and sewed it along the entire neckline. The neckline band was not stretched; it was simply used as an edge finish. The vertical edge was stitched with a 1″ hem to add weight. For a heavier fabric, folding over a 1/2 or 5/8″ hem would have worked.
Using this same technique, here’s one with more draped sweater. To achieve this, I extended the front center another 2-4″, or so that when pulled out straight, the center front edge was beyond the armpit on the opposite side.
Hope this helps you to make this stylish sweater without buying yet one more pattern.