The last post was a tutorial on how to make this dress for a big girl. Here are a few tips on how to make this Twirly Dress for a doll. The steps are the same as described here with the following changes and tips.
1. Use an 18″ doll pattern for a top or T-shirt.
2. Instead of cutting the top back on the fold, add 3/4″ for an overlap.
3. Finished length for the side seams on the top – 5-1/2″
4. Skirt tiers – cut 3 strips 1-1/2″ by the width of the fabric.
5. When assembling the top, sew both side seams but not the back seam as the back needs to be at least partially open in order to get the dress onto the doll.
6. Kit’s dress is a little too twirly. Gathering ratio should be less than for a girl’s dress. I would recommend no more than a 1.5:1 ratio.
7. After tiers are ruffled and sewed onto the dress, sew up the back seam, stopping at the point where the skirt meets the top.
For Christmas, every girl deserves a pretty new dress. This year, Catie’s dress was a Twirl Dress – a T-shirt dress with a ruffled skirt and of course a matching dress for Kit, her American Girl doll. Made from stretch velveteen, this twirly dress is a favorite style for girls and in fact, it’s the third in this style that I’ve sewed for Cate. Most of all, mom’s love it because it looks dressy, is washable and the color doesn’t fade.
The steps to make this adorable dress are so simple that it’s hard to believe it all starts with a T-shirt pattern. In this case, I used a boy’s T-shirt pattern (minus the neck binding) I’ve modified a number of times.
Supplies: 1-1/2 to 2 yards of knit velveteen fabric (depends on the fabric width), matching thread, embroidered design. Wider fabric
Steps for Dress Top:
1. Select a T-shirt pattern of the desired size, or one size larger if you wish to have growing room. For the length, use the full length of the T-shirt. (Cate’s is a size 6x-7 with a finished shirt side seam is 12″)
2. Cut T-shirt from the fabric, taking care to have all pieces cut in the same direction.
Tip: In order to get the richness of the velvet color, when cutting velvet the nap should go upward. In other words, when you brush your hand upward on the fabric, it feels smooth.
3. Calculate how many strips you will need for the twirly skirt.
Tier 1 – at least twice the circumference of the top (52″ for Cate – fabric was 60″ wide)
Tier 2: One-and-a-half to twice the circumference of Tier 1 (requires sewing 2 strips together)
Tier 3 – One-and-a-half to twice the circumference of Tier 2 (will also require sewing several strips together)
Note: If you are using a ruffling foot, do not cut the strips to the desired length as ruffling is not an exact process. You can cut off any extra fabric after the tier is attached to the previous layer.
4. For the top front, I made the final cut after the embroidery. For the skirt, cut the number of strips you will need, cutting across the grain. For a smaller size, these strips are 3″ , 3-1/2″ or 4″ wide. For Cate’s dress I cut 4-1/2″ strips, which allows for 4″ tiers minus 1/4″ for each seam allowance.
5. Embroider or place your desired design on the shirt front.
6. Assemble the T-shirt but do not sew the bottom 5 or 6″ of one side seam. Finish the sleeve and neckline but do not hem the shirt. (For the neckline I turned over 1/2″ and sewed with a coverstitch however using a double needle method on a standard sewing machine would work as well).
Now Assemble/add the Skirt:
There are several ways to make the ruffles.
Gather the top of the cut strip and attach to the dress top (i.e. t-shirt) at a 1.5:1 or 2:1 gathering ratio. For subsequent ruffles, add the gathered portion to the bottom of the previous ruffle. Test to see how you want it to look.
Use a ruffling foot on your sewing machine or serger, set to a 1.5:1 or 2:1 ratio. For this method, it is important to do a test or two to get the result you want. My preferred method is to use the serger ruffling foot.
Steps if using a Ruffling Foot:
1. Place the piece to be ruffled on the bottom, with right sides together.
Note: Because this fabric is stretchy, holding a narrow strip of water-soluble stabilizer over the top fabric (piece that’s not being gathered) will reduce the amount of undesired stretch.
2. When you get to the end, you will likely have some left over ruffle. Cut off.
3. Sew the next two tiers in the same manner.
4. Sew the open side seam.
5. Hem by turning under 1/4″. Sew on a standard sewing machine.
6. Steam dress from the back side, using a generous amount of steam over the ruffled seams. If the top layer stretched, the steaming will help the latex in the fabric to shrink back into shape.
It’s been so long since the last post that you probably think I fell off the face of the earth. In reality we were traveling for several weeks, then on a 14 day cruise, visiting our son in Philly and being sick. The day we got off the cruise ship, both Kevin and I got some type of illness. Now, two weeks after the cruise ended, we still have a fatigue that seems impossible to shake.
After bragging about the small volume of cruise clothing I tucked in the bottom of my backpack for our recent trip, it only seems fair that I publicly evaluate the plan. The following are my thoughts, but first a few photos for proof:
1. When traveling on land for two weeks, I was incredibly grateful to only have a small bag of formal cruise wear at the bottom of my backpack (aka suitcase). At each hotel it stayed in the bottom of my bag and I didn’t even look at it until we got onto the cruise ship.
2. I still smile with delight as I think of our cruise-mates struggling with two suitcases apiece, each nearly the size of a small car.
3. The number of pieces of formal clothing was perfect for four formal nights on the ship; a lbd, a long black skirt, 3 sleeveless tops, 2 silk shawls, one pair of sparkly flats. In fact I didn’t need one of the silk tops for a formal night.
4. The amount of wrinkling was not insignificant, however after hanging the clothing most of the wrinkles fell out. Thankfully the ship has a laundry service which was only necessary for the lbd which is made from a poly-rayon-lycra blend.
I didn’t mention that Kevin packed in a similar manner. Naming it “a suit-in-a-bag”, he packed a Lands’ End wool blazer and pants in a zip-lock bag. When he hung the pieces, they hardly had any wrinkles.